ELM 130 Industrial Electricity

This course provides an overview of three-phase circuits, protective devices, transformer connections, motors, motor starters, and industrial maintenance techniques. Electrical and solid state motor controls are introduced. Emphasis is placed on electrical and industrial safety circuits.

Credits

3

Prerequisite

Prerequisite: MAT 152 or higher

See Course Syllabus

Course Number and Title:

ELM 130 Industrial Electricity

Campus Location

  • Dover

Effective Date

2022-51

Prerequisites

Prerequisite: MAT 152 or higher

Course Credits and Hours

3 credit(s)

2 lecture hours/week

3 lab hours/week

Course Description

This course provides an overview of three-phase circuits, protective devices, transformer connections, motors, motor starters, and industrial maintenance techniques. Electrical and solid state motor controls are introduced. Emphasis is placed on electrical and industrial safety circuits.

Additional Materials

None

Required Text(s)

Obtain current textbook information by viewing the campus bookstore - https://www.dtcc.edu/bookstores online or visit a campus bookstore. Check your course schedule for the course number and section.

Disclaimer

This workforce solution was funded by a grant awarded by the U.S. Department of Labor’s Employment and Training Administration. The solution was created by the grantee and does not necessarily reflect the official position of the U.S. Department of Labor. The Department of Labor makes no guarantees, warranties, or assurances of any kind, express or implied, with respect to such information, including any information on linked sites, and including, but not limited to accuracy of the information or its completeness, timeliness, usefulness, adequacy, continued availability or ownership.

Unless otherwise specified, this work by Delaware Technical Community College is licensed under a Creative Commons Attribution 4.0 International License.   Creative

Core Course Performance Objectives (CCPOs)

  1. Work safely in a lab/shop environment. (CCC 2, 3, 4; PGC 2, 3, 4, 5)
  2. Examine single-phase circuits, three-phase circuits, transformers, and motor control. (CCC 2, 4, 6; PGC 2, 3, 4, 5)
  3. Perform various motor and drive maintenance techniques such as infrared thermography, power analysis, and vibration testing. (CCC 1, 2, 4, 6; PGC 3)
  4. Perform experiments in industrial electricity applications. (CCC 1, 2, 3, 4, 6; PGC 4, 5, 6)

See Core Curriculum Competencies and Program Graduate Competencies at the end of the syllabus. CCPOs are linked to every competency they develop.

Measurable Performance Objectives (MPOs)

Upon completion of this course, the student will:

  1. Work safely in a lab/shop environment.
    1. Identify worker safety regulations and standards.
    2. Describe three types of sensors used in machine safety operations.
    3. Perform lockout /tag-out procedures in accordance with Occupational Safety and Health Administration (OSHA) regulations.
    4. Describe the proper level of personal protection when working on a live circuit in accordance with the National Fire Protection Association (NFPA) 70E.
    5. Describe the emergency actions in the treatment for electric shock.
  2. Examine single-phase circuits, three-phase circuits, transformers, and motor control.
    1. Identify the four main components of an electrical circuit.
    2. Sketch a motor starting circuit.
    3. Describe the functions of a multi-meter.
    4. Use a voltmeter to locate a fault in an electrical circuit.
    5. Determine the condition of an electrical component with an ohmmeter.
    6. Determine the current draw of a component using an ammeter.
    7. Calculate power in a single-phase circuit.
    8. Calculate power in a three-phase circuit.
    9. Describe the functions of a transformer.
    10. Determine the output voltage of a transformer based on the input voltage.
  3. Perform various motor and drive maintenance techniques such as infrared thermography, power analysis, and vibration testing.
    1. Explain the benefits and techniques of proper lubrication.
    2. Explain how to perform a bearing inspection and interpret the results.
    3. Perform a bearing inspection using a thermometer, an infrared scanner, and a stethoscope.
    4. Explain how to perform an inspection of a rotor and stator, and interpret the results.
    5. Perform a belt inspection, and interpret the results.
    6. Perform vibration analysis, and interpret the results.
  4. Perform experiments in industrial electricity applications.
    1. Apply safety principles to laboratory activities.
    2. Document laboratory activities and results accurately.
    3. Diagram and describe the circuits and programming of laboratory activities.
    4. Discuss each of the following laboratory topics:
      1. Capacitive reactance
      2. Impedance
      3. Three-phase power measurements
      4. Squirrel cage induction motors
      5. Three-phase motor starters
      6. Frequency conversion
      7. Infrared thermography maintenance

Evaluation Criteria/Policies

The grade will be determined using the Delaware Tech grading system:

90-100 = A
80-89 = B
70-79 = C
0-69 = F
Students should refer to the Catalog/Student Handbook for information on the Academic Standing Policy, the Academic Integrity Policy, Student Rights and Responsibilities, and other policies relevant to their academic progress.

Final Course Grade

Calculated using the following weighted average

Evaluation Measure

Percentage of final grade

Summative: 2 Exams (equally weighted)

50%

Summative: 10-15 Laboratory Experiments (equally weighted)

30%

Formative: Homework/ Quizzes (equally weighted)

10%

Formative: Quizzes (equally weighted)

10%

TOTAL

100%

Program Graduate Competencies (PGCs are the competencies every graduate will develop specific to his or her major)

  1. Under engineers' direction, design basic circuitry and draft sketches to clarify details of design documentation.
  2. Build, modify, and test circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electrical or electronic systems.
  3. Install, maintain, adjust, and calibrate electrical or electronic equipment.
  4. Identify and resolve equipment malfunctions.
  5. Read blueprints, wiring diagrams, schematic drawings, and engineering instructions for assembling, maintaining, or repairing equipment.
  6. Employ ethical standards, sound leadership and management principles, and participate in lifelong learning.

Core Curriculum Competencies (CCCs are the competencies every graduate will develop)

  1. Apply clear and effective communication skills.
  2. Use critical thinking to solve problems.
  3. Collaborate to achieve a common goal.
  4. Demonstrate professional and ethical conduct.
  5. Use information literacy for effective vocational and/or academic research.
  6. Apply quantitative reasoning and/or scientific inquiry to solve practical problems.

Students in Need of Accommodations Due to a Disability

We value all individuals and provide an inclusive environment that fosters equity and student success. The College is committed to providing reasonable accommodations for students with disabilities. Students are encouraged to schedule an appointment with the campus Disabilities Support Counselor to request an accommodation needed due to a disability. The College's policy on accommodations for persons with disabilities can be found in the College's Guide to Requesting Academic Accommodations and/or Auxiliary Aids Students may also access the Guide and contact information for Disabilities Support Counselors through the Student Resources web page under Disabilities Support Services, or visit the campus Advising Center.

Minimum Technology Requirements

Minimum technology requirements for online, hybrid, video conferencing and web conferencing courses.